Because you are passionate by

le Bricolage la Couture le Modélisme les Jouets le Sport les Nouvelles Technologies les Jeux de sociétés la Cuisine le Jardinage la Décoration les Jeux le Radio Modelisme les Bijoux la Science le Recyclage

TiZYX k25 3D printer is made for you!

1
2
3
4
5
6
7
8
9
10
11
12
1

High structure in “X” for more rigidity

2

Modern design that encompass all the technical pieces

3

Threaded rods for an optimum precision (zero wooble)

4

Deported extruder on the axis X to facilitate the change of the filament and to balance the loads

5

Tilted display for a complete control of the printing

6

SD Card player.
Keep all your files within easy reach

7

Emergency stop button
(we are never too careful)

8

Spanner adjuster for an easy access to the menus

9

Printing volume of 25x25x25cm
that is to say almost 2x the printing volume of a standard 3D printer

10

Heat bed as standard!
Control the adherence of your prints

11

3D printing nozzle of 0.4mm
interchangeable!

12

Automatic levelling sensor in 9 points.
For a perfect planeness on all the surface of your bed!

TiZYX k25 in number

25 x 25 x 25 cm

TiZYX k25 takes its name from its using dimensions: 25x25x25cm.
That is a printing volume of 15.6L! What is 2 times bigger than standard 3D printers (20x20x20cm).
This volume allow to print bigger pieces or in several goes on the same printer.

50 µm

That is the minimal thickness printing layer of the TiZYX k25. It’s also the thickness of a hair but especially the same resolution than most of 3D printers reserved to professionals

5,0 µm et 12,0 µm

5µm for the precision of positioning in height.
12µm for the one in width and depth.
It allows the positioning of the head with a surgical precision! Perfect to keep all the details of your projects

Technical features


Minimal printing thickeness: 0.05mm

Positioning precision: 0.005 mm on Z axe and 0.012 mm on X and Y axes

Automatic levelling: Inductive sensor integrated in the nozzle block with 9 points of levelling for a perfect planeness

Printing volume: 25x25x25cm (=9.84×9.84×9.84″), that is a volume of 15.6L (against 8L for a traditional 3D printer of 20x20x20cm)

Printing speed: 30 to 100 mm/s

Nozzle supplied: size of 0.4mm limited to 270°C (=518°F)

Recommended material: PLA for ecological reasons but also all the plastics used at showed temperatures

Heat bed: 25x25cm (=9.84×9.84″) to facilitate the adhesion on all the surface – 240W for a fast heating time and a maximal temperature of 110°C (=230°F)

Control display: 128×64 pixels, SD Card player, spanner adjuster and emergency stop button

Bulk: 52x45x43cm (=20.47×17.71×16.92″). The bed is always inside the structure

Weight: 7 kg

Design softwares: Compatible with all the softwares of drawing and 3D design

Slicer softwares: Compatible with most of the softwares Cura/Repetier/Simplify3D…

Avis récents